Home > Publications

[2001-1]

Van Paepegem, W. and Degrieck, J. (2001). Experimental Setup for and Numerical Modelling of Bending Fatigue Experiments on Plain Woven Glass/epoxy Composites. Composite Structures, 51(1), 1-8 (SCI-IF: 0.659). (.pdf)

[2001-2]

Degrieck, J., Van Paepegem, W. and Boone, P. (2001). Application of digital phase-shift shadow Moiré to micro deformation measurements of curved surfaces. Optics and Lasers in Engineering, 36(1), 29-40 (SCI-IF:1.006). (.pdf)

[2001-3]

Van Paepegem, W. and Degrieck, J. (2001). Fatigue Degradation Modelling of Plain Woven Glass/epoxy Composites. Composites Part A, 32(10), 1433-1441 (SCI-IF: 1.131). (.pdf)

[2001-4]

Van Paepegem, W., Degrieck, J. and De Baets, P. (2001). Finite Element Approach for Modelling Fatigue Damage in Fibre-reinforced Composite Materials. Composites Part B, 32(7), 575-588 (SCI-IF: 0.890). (.pdf)

[2002-5]

Van Paepegem, W. and Degrieck, J. (2002). Coupled Residual Stiffness and Strength Model for Fatigue of Fibre-reinforced Composite Materials. Composites Science and Technology, 62(5), 687-696 (SCI-IF: 1.320). (.pdf)

[2002-6]

Van Paepegem, W. and Degrieck, J. (2002). Tensile and Compressive Damage Coupling for Fully-reversed Bending Fatigue of Fibre-reinforced Composites. Fatigue and Fracture of Engineering Materials & Structures, 25(6), 547-562 (SCI-IF: 0.706). (.pdf)

[2002-7]

Van Paepegem, W. and Degrieck, J. (2002). A New Coupled Approach of Residual Stiffness and Strength for Fatigue of Fibre-reinforced Composites. International Journal of Fatigue, 24(7), 747-762 (SCI-IF: 1.014). (.pdf)

[2002-8]

Van Paepegem, W. and Degrieck, J. (2002). Effects of Load Sequence and Block Loading on the Fatigue Response of Fibre-reinforced Composites. Mechanics of Advanced Materials and Structures, 9(1), 19-35 (SCI-IF: 0.278). (.pdf)

[2003-9]

Van Paepegem, W. and Degrieck, J. (2003). Calculation of Damage-dependent Directional Failure Indices from the Tsai-Wu Static Failure Criterion. Composites Science and Technology, 63(2), 305-310 (SCI-IF: 1.320). (.pdf)

[2003-10]

Van Paepegem, W. and Degrieck, J. Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading. Composites Science and Technology, 63(5), 677-694 (SCI-IF: 1.320). (.pdf)

[2004-11]

Van Paepegem, W. and Degrieck, J. (2004). Simulating inplane fatigue damage in woven glass fibre-reinforced composites subject to fully-reversed cyclic loading. Fatigue and Fracture of Engineering Materials & Structures, 27(12), 1197-1208 (SCI-IF: 0.706). (.pdf)

[2005-12]

Van Paepegem, W., Dechaene, R. and Degrieck, J. (2005). Nonlinear correction to the bending stiffness of a damaged composite beam. Composite Structures, 67(3), 359-364 (SCI-IF: 0.659). (.pdf)

[2005-13]

Van Paepegem, W. and Degrieck, J. (2005). Simulating Damage and Permanent Strain in Composites under In-plane Fatigue Loading. Computers & Structures, 83(23-24), 1930-1942 (SCI-IF: 0.634). (.pdf)

[2006-14]

Van Paepegem, W., De Geyter, K., Vanhooymissen, P. and Degrieck, J. (2006). Effect of friction on the hysteresis loops from three-point bending fatigue tests of fibre-reinforced composites. Composite Structures, 72(2), 212-217 (SCI-IF: 0.659). (.pdf)

[2006-15]

Quintelier, J., Samyn, P., De Baets, P., Tuzolana, T., Van Paepegem, W., Van den Abeele, F. and Vermeulen, J. (2006). Wear behavior of carbon fiber- reinforced poly(phenylene sulfide). Polymer Composites, 27(1), 92-98 (SCI-IF: 0.649). (.pdf)

[2006-16]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006). Deformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions. Polymer Testing, 25(2), 230-245 (SCI-IF: 1.199). (.pdf)

[2006-17]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006). Large scale friction and wear tests on a hybrid UHMWPE-pad / primer coating combination used as bearing element in an extremely high-loaded ball-joint. Tribology International, 39(8), 796-811 (SCI-IF: 0.913). (.pdf)

[2006-18]

Samyn, P., Van Schepdael, L., Van Paepegem, W., Leendertz, J.S., Suister, E., De Baets, P. and Degrieck, J. (2006). Fracture assessment of carbon fibre/epoxy reinforcing rings through a combination of full-scale testing, small-scale testing and stress modelling. Applied Composite Materials, 13(2), 57-85 (SCI-IF: 0.444). (.pdf)

[2006-19]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results. Composites Science and Technology, 66(10), 1455-1464 (SCI-IF: 1.320). (.pdf)

[2006-20]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations. Composites Science and Technology, 66(10), 1465-1478 (SCI-IF: 1.320). (.pdf)

[2006-21]

Samyn, P., Van Paepegem, W., Leendertz, J.S., Gerber, A., Van Schepdael, L., Degrieck, J. and De Baets, P. (2006). Large-scale evaluation of constrained bearing elements made of thermosetting polyester resin and polyester fabric reinforcement. Journal of Tribology – Transactions of the ASME, 128(4), 681-696 (SCI-IF: 0.682).

[2007-22]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J., Vandamme, S. and Chah, K. (2007). Deformation Monitoring of Composite Structures: Three dimensional strain and temperature monitoring of composite laminates. INSIGHT, 49(1), 10-16 Jan 2007 (SCI-IF: 0.418). (.pdf)

[2007-23]

Van Paepegem, W., Van Schepdael, L., Degrieck, J., Samyn, P., De Baets, P., Suister, E. and Leendertz, J.S. (2007). Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier. Composite Structures, 78(3), 359-367 (SCI-IF: 0.659). (.pdf)

[2007-24]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2007). Poisson’s ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics. Fatigue and Fracture of Engineering Materials & Structures, 30(4), 269–276 (SCI-IF: 0.706) (.pdf)

[2007-25]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Van Paepegem, W., De Baets, P. and Degrieck, J. (2007). Short-beam-shear testing of carbon fibre/epoxy ring segments with variable cross-sectional geometry as a representative selection criterion for full-scale delamination. ASTM Journal of Testing and Evaluation, 35(3), 310-320 (SCI-IF: 0.252). (.pdf)

[2007-26]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2007). Finite element analysis of transmission of leaky Rayleigh waves at the extremity of a fluid-loaded thick plate. Journal of Applied Physics, 101(11), Art. No. 114907 (SCI-IF: 2.316). (.pdf)

[2007-27]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., Degrieck, J. and De Baets, P. (2007). Full-scale analysis of deformation and stress distribution for constrained composite bearing elements under compressive yielding conditions. Materials & Design, 28(9), 2450-2470 (SCI-IF: 0.983). (.pdf)

[2007-28]

Van Paepegem, W., Degrieck, J., Samyn, P., De Baets, P., Van Schepdael, L., Suister, E. and Leendertz, J.S. Characterization of composites for use in the ball-joints of the Maeslant storm surge barrier. Polymer Composites, 28(4), 470-478 (SCI-IF: 1.163).

[2007-29]

Samyn, P., Van Paepegem, W., Leendertz, J.S., Suister, E., Van Schepdael, L., Degrieck, J. and De Baets, P. (2007). Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier. Engineering Structures, 29(10), 2673-2691 (SCI-IF: 0.813). (.pdf)

[2007-30]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics. Smart Materials and Structures, 16(5), 1821-1828 (SCI-IF: 1.150). (.pdf)

[2007-31]

De Baere, I., Van Paepegem, W., Degrieck, J., Sol, H., Van Hemelrijck, D. and Petreli, A. (2007). Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric reinforced laminates. Composites Part A, 38(9), 2047-2054 (SCI-IF: 1.875). (.pdf)

[2007-32]

De Baere, I., Voet, E., Van Paepegem, W., Vlekken, J., Cnudde, V., Masschaele, B. and Degrieck, J. (2007). Strain Monitoring in Thermoplastic Composites with Optical Fiber Sensors : embedding process, visualization with micro-tomography and fatigue results. Journal of Thermoplastic Composite Materials, 20(5), 453-472 (SCI-IF: 0.466). (.pdf)

[2008-33]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression. Experimental Techniques, 32(3), 62-69 (SCI-IF: 0.400). (.pdf)

[2008-34]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of a modified three-rail shear test for shear fatigue of composites. Polymer Testing, 27(3), 346-359 (SCI-IF: 1.357). (.pdf)

[2008-35]

Van Paepegem, W., Shulev, A., Moentjens, A., Harizanova, J., Degrieck, J. and Sainov, V. (2008). Use of projection moiré for measuring the instantaneous out-of-plane deflections of composite plates subject to bird strike. Optics and Lasers in Engineering, 46(7), 527-534 (SCI-IF: 0.872). (.pdf)

[2008-36]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Comparison of the modified three-rail shear test and the [(+45,-45)]ns tensile test for pure shear fatigue loading of carbon fabric thermoplastics. Fatigue and Fracture of Engineering Materials & Structures , 31(6), 414-427 (SCI-IF: 0.726). (.pdf)

[2008-37]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates. Polymer Composites, 29(10), 1067-1076 (SCI-IF: 1.058). (.pdf)

[2008-38]

Van Hemelrijck, D., Ramault, C., Makris, A., Lamkanfi, E., Van Paepegem, W. and Lecompte, D. (2008). Biaxial testing of fibre reinforced composite laminates. Proceedings of the Institution of Mechanical Engineers Part L – Journal of Materials – Design and applications, 222(L4), 231-239 (SCI-IF: 0.244). (.pdf)

[2009-39]

Van Paepegem, W., Shulev, A., Roussev, I., De Pauw, S., Degrieck, J. and Sainov, V. (2009). Study of the deformation characteristics of window security film by digital image correlation techniques. Special Issue of Optics and Lasers in Engineering, 47(3-4), 390-397 (SCI-IF: 0.872). (.pdf)

[2009-40]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites. Polymer Composites, 30(4), 381-390 (SCI-IF: 1.058). (.pdf)

[2009-41]

De Baere I., Van Paepegem W. and Degrieck J. (2009). On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part I: Influence of the sensor. Polymer Testing, 28(2), 196-203 (SCI-IF: 1.357). (.pdf)

[2009-42]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). Comparison of different set-ups for fatigue testing of thin composite laminates in bending. Special Issue of International Journal of Fatigue, 31(6), 1095-1011 (SCI-IF: 1.117). (.pdf)

[2009-43]

Blommaert, C., Van Paepegem, W. and Degrieck, J. (2009). Design of Composite Material for Cost Effective Large Scale Production of Components for Floating Offshore Structures. Special Issue of Plastics, Rubber and Composites: Macromolecular Engineering, 38(2-4), 146-152 (SCI-IF: 0.431). (.pdf)

[2009-44]

De Baere I., Van Paepegem W. and Degrieck J. (2009). On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part II. Analytical explanation. Polymer Testing, 28(3), 324-330 (SCI-IF: 1.357). (.pdf)

[2009-45]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2009). Numerical study of Rayleigh wave transmission through an acoustic barrier. Journal of Applied Physics, 105(11), article number 114902 (SCI-IF: 2.171).

[2009-46]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). Modelling the nonlinear shear stress-strain behaviour of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(+45,-45)]4s tensile test. Polymer Composites, 30(7), 1016-1026 (SCI-IF: 1.058).

[2009-47]

Luyckx, G., Voet, E., Geernaert, T., Chah, K., Nasilowski, T., De Waele, W., Van Paepegem, W., Becker, M., Bartelt, H., Urbanczyk, W., Wojcik, J., Degrieck, J., Berghmans, F. and Thienpont, H. (2009). Response of FBGs in Micro-structured and Bow tie Fibers Embedded in Laminated Composite. IEEE Photonics Technology Letters, 21(18), 1290-1292 (SCI-IF: 2.173)

[2010-48]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2010). Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites. Special issue of International Journal of Fatigue, 32(1), 197-207 (SCI-IF: 1.117).

[2010-49]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2010). Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics through the Poisson’s ratio degradation. Special issue of International Journal of Fatigue, 32(1), 184-196 (SCI-IF: 1.117).

[2010-50]

De Backer G., Vantorre M., Beels C., De Pré J., Victor S., De Rouck J., Blommaert C. and Van Paepegem W. (2010). Experimental Investigation of Water Impact on Axisymmetric Bodies. Applied Ocean Research, 31(3), 143-156 (SCI-IF: 0.310)

[2010-51]

Rezaei, A., Ost, W., Van Paepegem, W., Degrieck, J. and De Baets, P. (2010). Experimental Study and Numerical Simulation of the Large-Scale Testing of Polymeric Composite Journal Bearings: Two-Dimensional Modeling and Validation. Tribology Letters, 37(2), 261-272 (SCI-IF: 1.385).

[2010-52]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010). Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model. Polymer Testing, 29(1), 7-13 (SCI-IF: 1.357).

[2010-53]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010). Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities. Polymer Testing, 29(1), 132-138 (SCI-IF: 1.357).

[2010-54]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Experimental study on the axial crushing behaviour of pultruded composite tubes. Polymer Testing,29(2), 224-234 (SCI-IF: 1.357).

[2010-55]

Makris, A., Vandenbergh, T., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010). Shape optimisation of a biaxially loaded cruciform specimen. Polymer Testing, 29(2), 216-223 (SCI-IF: 1.357).

[2010-56]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures. Polymer Testing, 29(3), 381-396 (SCI-IF: 1.357).

[2010-57]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010). Evaluation of digital image correlation techniques using realistic ground truth speckle images. Measurement Science and Technology, 21(5), article number 055102 (SCI-IF: 1.493).

[2010-58]

Degroote, J., Souto-Iglesias, A., Van Paepegem, W., Annerel, S., Bruggeman, P. and Vierendeels, J. (2010). Partitioned simulation of the interaction between an elastic structure and free surface flow. Computer Methods in Applied Mechanics and Engineering, 199(33-36), 2085-2098 (SCI-IF: 2.129).

[2010-59]

De Baere, I., Luyckx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2009). On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions. Accepted for Special Issue of Optics and Lasers in Engineering (SCI-IF: 1.262).

[2010-60]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). An investigation of the mechanical behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading. Accepted for Polymer Composites (SCI-IF: 1.058).

[2010-61]

Lamkanfi, E., Declercq, N., Van Paepegem, W. and Degrieck, J. (2010). Lamb wave excitation and mode conversion in plates. Accepted for Journal of the Acoustical Society of America (SCI-IF: 1.523).

[2010-62]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010) Comparison of Different Techniques for Strain Monitoring of a Biaxially Loaded Cruciform Specimen. Accepted for Strain (SCI-IF: 1.083).

[2010-63]

De Strycker, M., Schueremans, L., Van Paepegem, W. and Debruyne, D. (2010). Measuring the thermal expansion coefficient of tubular steel specimens with digital image correlation techniques. Accepted for Optics and Lasers in Engineering (SCI-IF: 1.262).

[2010-64]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part I –Central delamination and triggering modelling. Accepted for Polymer Testing (SCI-IF: 1.667).

[2010-65]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., and Vantomme, J. (2010). Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part II – Multiple delaminations and initial geometric imperfections. Accepted for Polymer Testing (SCI-IF: 1.667).

[2010-66]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2010). Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures. Accepted for Composites Part B: Engineering (SCI-IF: 1.704).

[2010-67]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2010). Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions. Accepted for Composite Structures (SCI-IF: 2.006).

[2010-68]

Daggumati, S., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Local damage in a 5-harness satin weave composite under static tension: part I - Experimental analysis. Accepted for Composites Science and Technology (SCI-IF: 2.901).

[2010-69]

Daggumati, S., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Local damage in a 5-harness satin weave composite under static tension: part II - Meso-FE modelling. Accepted for Composites Science and Technology (SCI-IF: 2.901).

[2000-1]

Van Paepegem, W. and Degrieck, J. (2000). Numerical modelling of fatigue degradation of fibre-reinforced composite materials. In: Topping, B.H.V. (ed.). Proceedings of the Fifth International Conference on Computational Structures Technology. Volume F: Computational Techniques for Materials, Composites and Composite Structures. Leuven, Belgium, 6-8 September 2000, Civil-Comp Press, pp. 319-326.

[2000-2]

Van Paepegem, W. and Degrieck, J. (2000). Experimental setup for the bending fatigue of fibre-reinforced composite materials. In: Bache, M.R. et al. (eds.). Proceedings of Fatigue 2000: Fatigue & Durability assessment of materials, components and structures. Cambridge, United Kingdom, 10-12 April 2000, Chameleon Press Ltd., pp. 115-122.

[2005-3]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Fatigue Detection of Fibres Reinforced Composite Materials by Fringes Projection and Speckle Shear Interferometry. Proceedings of the Fifth International Workshop FRINGE 2005, 11-14 September 2005, Stuttgart, Germany, pp. 567-570.

[2005-4]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Testing of Fibers Reinforced Composite Vessel by Fringes Projection and Speckle Shear Interferometry. Proceedings of the International Conference on Holography, Optical Recording and Processing of Information, 21-25 May 2005, Varna, Bulgaria.

[2006-5]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Chah, K. (2006). Measurement of multi-axial stress/strain in composite elements with Bragg sensors. Proceedings of the Third European Workshop on Structural Health Monitoring (EWSHM), July 5-7, 2006, Granada, Spain.

[2007-6]

Taillaert, D., Van Paepegem, W., Vlekken, J. and Baets, R. (2007). A thin foil optical strain gage based on silicon-on-insulator microresonators. Proceedings of the Third European Workshop on Optical Fibre Sensors (EWOFS 2007), 4-6 July 2007, Napoli, Italy.

[2007-7]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Feasibility study of an embedded Multi-Axial fibre bragg grating sensor. Proceedings of the SPIE Conference on Optical Sensing Technology and Applications, Prague, Czech Repubic, 16-18 April, 2007.

[2007-8]

Shulev, A., Van Paepegem, W., Harizanova, J., Moentjens, A., Degrieck, J. and Sainov, V. (2007). Projection moiré measurement of the deflection of composite plates subject to bird strike impact. Optical Metrology 2007 – Optical Measurement Systems for Industrial Inspection, Munich, Germany, 18-22 June 2007.

[2007-9]

Samyn, P., Quintelier, J., Van Paepegem, W. and De Waele, W. (2007). A relation between laboratory and full-scale testing of polyester/polyester composites under static and dynamic load. Proceedings of PRICM-6, 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007.

[2008-10]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008). Gradient-based optical flow for sub-pixel registration of speckle image sequences using a spatial/temporal postprocessing technique. Proceedings of the 2008 IEEE International Conference on Image Processing, 7073(A731), San Diego, California, U.S.A., October 12–15, 2008.

[2008-11]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008). Optical Flow Processing for Sub-pixel Registration of Speckle Image Sequences. Proceedings of the XXXI conference on Applications of Digital Image Processing, A731-A731, San Diego, California, U.S.A., August 11-14, 2008.

[2008-12]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008). Strain monitoring of FRP elements using an embedded fibre optic sensor. Third International Conference on Smart Materials, Structures and Systems, Acireale, Italy, June 08-13, 2008.

[2008-13]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Electrical resistance measurement on carbon fibre-reinforced thermoplastics with rivets as electrodes. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2008-14]

De Baere, I., Luyckx, G., Van Paepegem, W., Degrieck, J., Voet, E. and Vlekken, J. (2007). The use of optical fibres for fatigue testing of fibre-reinforced thermoplastics. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2008-15]

Luyckx, G., Degrieck, J., De Baere, I., De Waele, W., Van Paepegem, W. and Verbeke, T. (2007). Monitoring of a curved beam test structure using Bragg sensors and acoustic emission. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2008-16]

Luyckx, G., Degrieck, J., De Waele, W., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Non-destructive evaluation of composite structures using an innovative Bragg sensor. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2009-17]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Numerical axial impact study of pultruded circular and square composite tubes. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-18]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Study of blast load on recyclable empty metal cans. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-19]

Palanivelu, S., De Pauw, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Validation of digital image correlation technique for impact loading applications. , Brussels, Belgium, 7-11 September 2009.

[2009-20]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2009). Novel pure-shear sheet specimen geometry for dynamic material characterisation. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-20]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009). Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2001-1]

Degrieck, J. and Van Paepegem, W. (2001). Fatigue Damage Modelling of Fibre-Reinforced Composite Materials: Review. Applied Mechanics Reviews, 54(4), 279-300. (.pdf)

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001). Modelling Strategies for Fatigue Damage Behaviour of Fibre-reinforced Composites. European Journal of Mechanical and Environmental Engineering, 46(4), 217-227. (.pdf)

[2001-3]

Van Paepegem, W. and Degrieck, J. (2001). Experimental and Numerical Investigation of Fatigue of Fibre-reinforced Composite Materials. Engineering Integrity - Journal of the Engineering Integrity Society, 9, 6-12.

[2001-4]

Van Paepegem, W. and Degrieck, J. (2001). Fatigue of Composites: Finite Element Implementation of Fatigue Degradation Models for Fibre-reinforced Composites. Composites in Manufacturing, 17(3), 1-6.

[2006-5]

Leendertz, H., Van Schepdael, L., Van Paepegem, W., Samyn, P., De Baets, P. and Degrieck, J. (2006). Anderung der gelenklagerkonstruktion des sturmflutsperrwerks bei Rotterdam. Stalhbau, 75 Heft 1 (Jan 2006), 45-54.

[2006-6]

Samyn, P., De Baets, P., Van Paepegem, W., Degrieck, J., Van Schepdael, L., Gerber, A. and Leendertz, J.S. (2006). Experimental Study of the Friction and Wear Behaviour of a Polymer Disc / Primer Coating Combination Used in Ball-Joints by Means of Large-Scale Testing. Tribotest, 12(2), 119-131.

[2008-7]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008). Strain monitoring of FRP elements using an embedded fibre optic sensor. Advances in Science and Technology, Vol. 56, August 2008.

[2002-1]

[2007-2]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2007). Numerical modelling of fatigue in textile polymer composites. In: Pavlou, D.G. (ed.). Computational & experimental analysis of damaged materials. Research Signpost, India (http://www.ressign.com/), 2007, pp. 39-75 (ISBN 978-81-7895-308-3).

[2008-3]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2008). Research directions in the fatigue testing of polymer composites. In: Durand, L.P.. (ed.). Composite Materials Research Progress. Nova Science Publishers, Inc., New York, United States of America (http://www.novapublishers.com) (ISBN 1-60021-994-2).

[2009-4]

Van Paepegem, W. (2009). Fatigue damage in structural textile composites: testing and modelling strategies. In: Miraftab, M. (ed.). Fatigue Failure of Textile Fibres. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, April 2009 (ISBN 978-1-84569-327-5).

[2009-5]

Van Paepegem, W. (2009). Mechanische karakterisering van vezelversterkte kunststoffen. In: De Moor, M. (ed.). Werken met innovatieve materialen: koudhardende kunststoffen (E: Working with innovative materials: cold curing plastics). Antilope Printing, Belgium (ISBN 978-9-08149-090-0).

[2010-6]

Van Paepegem, W. (2010). Fatigue damage modelling with the phenomenological residual stiffness approach. In: Vassilopoulos, A.P. (ed.). Fatigue life prediction of composites and composite structures. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, July 2010 (ISBN 978-1-84569-525-5).

[2010-7]

Van Paepegem, W. (2010). Fatigue testing for polymer matrix composites. Accepted chapter for Guedes, R.M. (ed.). Creep and fatigue in polymer matrix composites. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom.

[2000-1]

Van Paepegem, W. and Degrieck, J. (2000). Fatigue Degradation Modelling of Plain Woven Glass/epoxy Composites. Proceedings of the Fifth International Conference on Textile Composites (TEXCOMP-5). Leuven, Belgium, 18-20 September 2000.

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001). New Coupled Approach of Residual Stiffness and Strength for Fatigue of Fibre-reinforced Composites. Proceedings of the Eight International Conference on Composites Engineering (ICCE/8), Tenerife, Spain, 5-11 August 2001, pp. 945-946.

[2002-3]

Van Paepegem, W. and Degrieck, J. (2002). Modelling single-sided and fully-reversed bending fatigue of fibre-reinforced composites. Proceedings of the Tenth European Conference on Composite Materials (ECCM-10), Brugge, Belgium, 3-7 June 2002.

[2002-4]

Van Paepegem, W. and Degrieck, J. (2002). Modelling of fatigue degradation of glass fabric/epoxy laminates. SAMPE Benelux meeting. Gent, Belgium, 29 October 2002. Invited presentation.

[2003-5]

Van Paepegem, W. and Degrieck, J. (2003). Simulating Damage and Permanent Strain in Composites under In-plane Fatigue Loading. Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing (CC03), Egmond-aan-Zee, The Netherlands, 2-4 September 2003.

[2004-6]

Van Paepegem, W. and Degrieck, J. (2004). Simulating Damage and Permanent Strain in Fibre-reinforced Composites under In-plane Fatigue Loading. Proceedings of the Eleventh European Conference on Composite Materials (ECCM-11), Rhodes, Greece, 31 May – 3 June 2004.

[2004-7]

Samyn, P., De Baets, P., Van Paepegem, W., Van Schepdael, L., Suister, E. and Leendertz, J.S. (2004). Design of a carbon/epoxy reinforcing ring reducing creep of UHMWPE in high-loaded sliding contacts. Proceedings of the Eighth International Conference on Tribology, Veszprem, Hungary, 3-4 June 2004.

[2004-8]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W. and Degrieck, J. (2004). Fatigue detection of fibre-reinforced composite materials by fringe projection interferometry. Proceedings of the Twelfth International Conference on Experimental Mechanics (ICEM-12), Bari, Italy, 29 August – 1 September 2004.

[2005-9]

Van Paepegem, W. (2005). Damage in composite materials: from phenomenology via analysis towards modelling. NIDAGROUP Workshop, 11 March 2005, Luxemburg. Invited presentation.

[2005-10]

Van den Abeele, F., Dechaene, R., Van Paepegem, W. and Degrieck, J. (2005). Numerical modelling of impact damage in composite materials. Third International Conference on Advanced Computational Methods in Engineering (ACOMEN), 30 May – 2 June 2005, Gent, Belgium.

[2005-11]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2005). Modelling the nonlinear shear stress-strain response of glass fibrereinforced composites. Third International Conference on Advanced Computational Methods in Engineering (ACOMEN), 30 May – 2 June 2005, Gent, Belgium.

[2005-12]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Results from Bilateral Collaboration in Detection of Fibre Reinforced Composite Materials by Fringes Projection and Speckle Shear Interferometry. Second workshop of the Scientific Research Network “Optical Measurement Techniques for Structures and Systems” (OPTIMESS), 27 October 2005, Gent, Belgium.

[2005-13]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Chah, K. (2005). Theoretical study of the feasibility for discriminating axial and transverse stress/strain components with Bragg sensors. Second workshop of the Scientific Research Network “Optical Measurement Techniques for Structures and Systems” (OPTIMESS), 27 October 2005, Gent, Belgium.

[2005-14]

Quintelier, J., Samyn, P., De Baets, P. and Van Paepegem, W. (2005). Wear of steel against carbon fibre-reinforced PPS. BALKANTRIB ’05 5th International Conference on Tribology and 9th Yugoslav Conference on Tribology / Ed. Ivkovic , B. - Kragujevac : University of Kragujevac, Mechanical Engineering Faculty, 2005 - 845 p. - ISBN 86-80581-78-X p. 324-330. June 15 - 18, 2005, Kragujevac, Serbia.

[2005-15]

Samyn, P., Van Paepegem, W., De Baets, P., Degrieck, J., Leendertz, J.S., Suister, E. and Van Schepdael, L. (2005). Integrated design of highly loaded sliding surfaces on a huge ball-joint. World Tribology Congress III, Washington, September 12-16, 2005. Proceedings on CD-ROM.

[2006-16]

Van den Abeele, F., Van Paepegem, W. and Degrieck, J. (2006). Impact Damage Model for Fibre-Reinforced Composite Materials. Proceedings of the 7th National Congress on Theoretical and Applied Mechanics, May 29-30, 2006, Mons, Belgium.

[2006-17]

Degrieck, J. and Van Paepegem, W. (2006). Monitoring of Fatigue, Impact and Wear in Cetex TPC. Workshop on Cetex thermoplastic composites in honour of Willem van Dreumel. TUDelft, Delft, The Netherlands, 14 June 2006. Invited presentation.

[2006-18]

Luyckx, G., Degrieck, J., De Waele, W., Van Paepegem, W., Van Roosbroeck, J., Chah, K., Vlekken, J., McKenzie, I. and Obst, A. (2006). Feasibility study on measuring axial and transverse stress/strain components in composite materials using Bragg sensors. Proceedings of the 6th International Conference on Space Optics (ICSO 2006), June 27-30, Noordwijk, The Netherlands.

[2006-19]

Degrieck, J., Van Paepegem, W., Van Schepdael, L., Samyn, P., De Baets, P., Suister, E. and Leendertz, J.S. (2006). Characterization of composites for the Maeslant storm surge barrier. Proceedings of the 16th European Conference on Fracture (ECF16), Alexandroupolis, Greece, July 3-7, 2006. Invited presentation.

[2006-20]

Van Paepegem, W., Van Schepdael, L., Samyn, P., Leendertz, J.S., De Baets, P. and Degrieck, J. (2006). Reliable small-scale qualification tests for carbon/epoxy rings in the Maeslant storm surge barrier. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-21]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Chah, K. (2006). Multi-axial Fiber Bragg sensors for monitoring purposes. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-22]

Van den Abeele, F., Van Paepegem, W. and Degrieck, J. (2006). Experimental characterisation and numerical modelling of impact damage in fibre-reinforced composites. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-23]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-24]

Shulev, A., Van Paepegem, W., Roussev, I., De Pauw, S., Sainov, V. (2006). Optimization of Digital Speckle Photography for study of the tear resistance of window security film. Proceedings of the 9th International Conference on Laser & Laser Information Technologies (ILLA '2006), October 4-7, 2006, Plovdiv, Bulgaria.

[2006-25]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Chah, K. (2006). Fiber optic sensing system for discriminating multi-axial strain components in composite elements. Proceedings of the 18th International Conference on Optical Fiber Sensors (OFS18), October 23-27, 2006, Cancún, México.

[2006-26]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Van Damme, S. (2006). Multi-axial fiber bragg sensors for monitoring purposes. SAMPE Benelux meeting, 21 November 2006, Sabena Technics, Brussels, Belgium. Invited presentation.

[2007-27]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Electrical resistance measurement on carbon fibre-reinforced thermoplastics with rivets as electrodes. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2007-28]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W. and Vandamme, S. (2007). Non-destructive evaluation of composite structures using an innovative Bragg sensor. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2007-29]

Luyckx, G., De Waele, W., Degrieck, J. and Van Paepegem, W. (2007). Monitoring of a curved beam test structure using Bragg sensors and acoustic emission. Poster presentation. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4) , Stuttgart, Germany, 2 – 4 april 2007.

[2007-30]

De Baere, I., Luyckx, G., Van Paepegem, W., Degrieck, J., Voet, E. and Vlekken, J. (2007). The use of optical fibres for fatigue testing of fibre-reinforced thermoplastics. Poster presentation. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007.

[2007-31]

De Baere, I., Voet, E., Luyckx, G., Van Paepegem, W., Vlekken, J., Cnudde, V., Masschaele, B. and Degrieck, J. (2007). On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-32]

Luyckx, G., De Baere, I., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Analysis of a curved composite test specimen with Fibre Bragg Gratings. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-33]

Van Paepegem, W., De Pauw, S., Shulev, A., Roussev, I., Degrieck, J., Sainov, V. (2007). Study of the deformation characteristics of window security film with optical techniques. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-34]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2007). Leaky Rayleigh waves propagating around the corner of a thick solid plate : Finite element analysis. Proceedings of the 153rd meeting of the Acoustical Society of America, 4-8 June 2007 Salt Lake City, Utah, USA.

[2007-35]

Lamkanfi, E., Ramault, C., Makris, A., Van Paepegem, W., Degrieck, J., Van Hemelrijck, D. and Sol, H. (2007). Experimental and theoretical study of the damage onset in biaxial cruciform specimens under static and hysteresis loading. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-36]

Makris, A., Ramault, C., Smits, A., Van Hemelrijck, D., Clarke, A., Williamson, C., Gower, M., Shaw, R., Mera, R., Lamkanfi, E. and Van Paepegem, W. (2007). A review of biaxial test methods for composites. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-37]

Ramault, C., Makris, A., Smits, A., Lecompte, D., Van Hemelrijck, D., Sol, H. and Van Paepegem, W. (2007). Inverse method for parameter determination of biaxially loaded cruciform composite specimens. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-38]

Van Hemelrijck, D., Ramault, C., Makris, A., Clarke, A., Williamson, C., Gower, M., Shaw, R., Mera, R., Lamkanfi, E. and Van Paepegem, W. (2007). Biaxial testing of fibre reinforced composites. Proceedings of the 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007.

[2007-39]

Kakogiannis, D., De Wolf, K., Palanivelu, S., Van Hemelrijck, D., Vantomme, J. and Van Paepegem, W. (2007). Blast loading response of typical steel cans. Proceedings of the International Conference on Structural Analysis of Advanced Materials (ICSAM – 2007), Patras, Greece, September 2-6, 2007.

[2007-40]

Van Hemelrijck, D., Makris, A., Ramault, C., Lamkanfi, E. and Van Paepegem, W. (2007). Towards the characterization of biaxial material performance. Proceedings of the International Conference on Structural Analysis of Advanced Materials (ICSAM – 2007), Patras, Greece, September 2-6, 2007. Keynote lecture.

[2007-41]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Simulating the plastic bending of innovative tube connections. Proceedings of the Ninth International Conference on Computational Plasticity (COMPLAS 2007), Barcelona, Spain, 5-7 September 2007.

[2007-42]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites. Proceedings of the Fourth International Conference on Fatigue of Composites (ICFC’04), Kaiserslautern, Germany, 26-28 September 2007.

[2007-43]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2007). Monitoring fatigue damage in fibre-reinforced plastics through the Poisson’s ratio degradation. Proceedings of the Fourth International Conference on Fatigue of Composites (ICFC’04), Kaiserslautern, Germany, 26-28 September 2007.

[2007-44]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Comparison of different set-ups for fatigue testing of thin composite laminates in bending. Proceedings of the International Conference on Damage Tolerance of Aircraft Structures (DTAS 2007), Delft, The Netherlands, 25-28 September 2007.

[2007-45]

De Smet, P., De Kinder, J., Van Paepegem, W. and Degrieck, J. (2007). Experimental evaluation of fracture matching methods based on 3D imaging techniques. Proceedings of the 15th International Forensic Science Symposium (IFSS), ICPO-Interpol General Secretariat, Lyon, October 23-26, 2007.

[2007-46]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Developing Innovative Tube Connections with the Aid of Finite Element Analysis. SIMULIA / Abaqus Benelux Users’ meeting 2007, Hoeven, The Netherlands, November 19-20, 2007.

[2007-47]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Lasergesneden buizen: zo eenvoudig het concept, zo onuitputtelijk de toepassingen. KVIV-FABI-WTCB-OCW Symposium "Mooi bedacht, nuttig toegepast", KMS-RMA Brussel, 28 November 2007.

[2007-48]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Laser cutting of tubes: possibilities in lightweight structures. Proceedings of the XIII International Conference on Lightweight Structures in Civil Engineering (LSCE 2007), Warsaw, Poland, 7 December 2007.

[2008-49]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2008). Effect of bending radius on plastic deformation in a combined cut-bent tube connection. Proceedings of the International Symposium on Plasticity 2008, Kailua/Kona, Hawaii, January 3-8, 2008.

[2008-50]

De Baere, I., Van Paepegem, W., Voet, E. and Degrieck, J. (2008). Fatigue testing of carbon fabric thermoplastics: different testing and instrumentation strategies. Proceedings of SEICO 08 – SAMPE EUROPE 29th International Conference and Forums, Paris Porte de Versailles Expo, France, 31 March – 2 April, 2008. Invited presentation.

[2008-51]

Van Paepegem, W., Shulev, A., Degrieck, J. and Sainov, V. (2008). Real-time measurement of the deformation of thermoplastic composite plates under bird strike impact. Proceedings of SEICO 08 – SAMPE EUROPE 29th International Conference and Forums, Paris Porte de Versailles Expo, France, 31 March – 2 April, 2008. Invited presentation.

[2008-52]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element study on the traveling of Leaky Rayleigh waves around the extremity of a thick fluid-loaded solid plate. Proceedings of the 10th School on Acousto-optics and Applications, Gdansk-Sopot, Poland, 12-15 May 2008.

[2008-53]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Numerical evidence of the tunneling of Rayleigh waves beneath a reflective sound barrier by use of the finite element method. Proceedings of the XI International Conference For Young Researchers on Wave Electronics and Its Applications in Information and Telecommunication Systems, St. Petersburg, Russia 25-30 May 2008.

[2008-54]

De Smet, P., Van Paepegem, W., Degrieck, J. and De Kinder, J. (2008). Fracture matching of broken utility knives using 3D imaging. Proceedings of the Shoeprints and Toolmarks meeting (SPTM 2008) - Expert Working Group on Marks (EWGM), Madrid, Spain, 27-29 May, 2008.

[2008-55]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2008). Biaxial fatigue testing using cruciform composite specimens. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-56]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2008). Strain distribution in a biaxially loaded cruciform composite specimen. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-57]

Blommaert, C., Degrieck, J. and Van Paepegem, W. (2008). Design of composite material for cost effective large scale production of components for floating offshore structures. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-58]

Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., Palanivelu, S., Van Paepegem, W., De Wolf, K. and Vantomme, J. (2008). Experimental and numerical study of the energy absorption capacity of pultruded composite tubes. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-59]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2008). Influence of geometrical discontinuities on the strain distribution of cruciform specimens subjected to biaxial loading conditions. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-60]

Palanivelu, S., Verhelst, R., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., De Wolf, K. and Vantomme, J. (2008). Experimental and numerical study on axial crushing behaviour of pultruded composite tubes. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-61]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Comparison of different setups for fatigue testing of thin composite laminates in bending. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-62]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of a modified three-rail shear test for shear fatigue of composites. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-63]

Van Paepegem, W. (2008). My research on composites: a matrix of fascination reinforced with fibres of dedication. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008. ESCM award. Invited plenary lecture.

[2008-64]

Kakogiannis, D., De Wolf, K., Palanivelu, S., Van Hemelrijck, D., Vantomme, J. and Van Paepegem, W. (2008). Blast Loading Response of Typical Coca-Cola Cans. Proceedings of the International Conference on Impact Loading of Lightweight Structures. Trondheim, Norway, 17-19 June 2008.

[2008-65]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element simulation of the linear and nonlinear interaction of progressive acoustic waves with a standing acoustic wave field. Proceedings of the second ASA-EAA joint conference Acoustics’08, Paris, France, 29 June – 4 July 2008.

[2008-66]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Conversion of a Scholte - Stoneley wave at the extremity of a fluid loaded plate : comparison between finite element method, radiation mode theory and experiments. Proceedings of the second ASA-EAA joint conference Acoustics’08, Paris, France, 29 June – 4 July 2008.

[2008-67]

Han, G., Degrieck, J., Van Paepegem, W., Xiao-xiong, J., Wei-ping, Y. and Wei-fang, C. (2008). Research on Internal Combustion Engine Sound Reduction Based on Uncertainty Theory. Proceedings of INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, Shanghai, China, 26-29 October 2008.

[2008-68]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element study of near edge Lamb wave excitation and mode conversion in plates. 17th National Symposium on Ultrasonics NSU-XVII, Varanasi, India, 4-6 December 2008.

[2008-69]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Use of the finite element method in the investigation of diffraction effects at the extremity of solid plate for Rayleigh and Scholte- Stoneley waves. 17th National Symposium on Ultrasonics NSU-XVII, Varanasi, India, 4-6 December 2008. Invited presentation.

[2009-70]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Blast energy absorption of recyclable beverage cans and composite tubes for sacrificial cladding structures. Accepted for the Proceedings of the Deformation and Fracture of Composites Conference (DFC10), Sheffield University, Sheffield, United Kingdom, 15-17 April 2009.

[2009-71]

Rah, K., Van Paepegem, W., Habraken, A.M., de Sousa, R. and Valente, R. (2009). Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures. Accepted for the Proceedings of the 12th International ESAFORM Conference on Material Forming (ESAFORM 2009), University of Twente, The Netherlands, 27-29 April, 2009.

[2009-72]

Cofaru, C., Philips, W., Van Paepegem, W., Lava, P. and Debruyne, D. (2009). Generation of realistic ground truth images using Radial Basis Functions for the evaluation of DIC algorithms. Accepted for the Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009.

[2009-73]

Stoykova, E., Van Paepegem, W., Minchev, G., Degrieck, J. and Sainov, V. (2009). Full field stress analysis of window security films by phase-stepping photoelasticity. Accepted for the Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009.

[2009-74]

Shulev, A., Van Paepegem, W., De Pauw, S., Stoikova, E., Degrieck, J. and Sainov, V. (2009). Projection moiré measurement of glass specimens retrofitted with safety film. Accepted for the Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009.

[2009-75]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Progressive damage modelling of FRP cruciform type specimens under biaxial loading conditions. Accepted for the Proceedings of the 8th National Congress on Theoretical and Applied Mechanics (NCTAM2009), Brussels, Belgium, 28-29 May 2009.

[2009-76]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Design and production of cruciform composite specimens for in-plane biaxial tests. Accepted for the Proceedings of the 8th National Congress on Theoretical and Applied Mechanics (NCTAM2009), Brussels, Belgium, 28-29 May 2009.

[2009-77]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E., Van Paepegem, W. and Philippidis, T. (2009). Biaxial Failure Envelopes for Glass Fibre Reinforced Composite Laminates. Accepted for the Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-78]

Ramault, C., Makris, A., Sol, H., Van Hemelrijck, D., Lecompte, D., Lamkanfi, E. and Van Paepegem, W. (2009). Development of an Inverse Method for Material Characterization using a Biaxially Loaded Cruciform Composite Specimen. Accepted for the Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-79]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J., Nurick, G.N. and Chung Kim Yuen, S. (2009). Experimental and Numerical Study of the Energy Absorption Capacity of Pultruded Tubes Under Blast Load. Accepted for the Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-80]

Degroote, J., Blommaert, C., Haelterman, R., Van Paepegem, W. and Vierendeels, J. (2009). Partitioned simulation of the impact of a deformable circular cylinder on a water surface. Accepted for the Proceedings of the 3rd International Conference on Computational Methods for Coupled Problems in Science and Engineering, Ischia Island, Italy, 8-10 June 2009.

[2009-81]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2009). Fatigue testing of carbon fabric thermoplastics: different set-ups and instrumentation strategies. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009. Invited presentation.

[2009-82]

Rezaei, A., Ost, W., Van Paepegem, W., Degrieck, J. and De Baets, P. (2009). Experimental and numerical study of the large-scale testing of filament wound composite bearings. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009. Invited presentation.

[2009-83]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Effect of tab design on the strain distribution of a biaxially loaded cruciform composite specimen. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-84]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Damage evolution on composite cruciform specimens under quasi-static biaxial loading. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-85]

Kakogiannis, D.A., Van Hemelrijck, D., Van Ackeren, J., Wastiels, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009). Experimental and numerical study of pultruded composite tubes under blast loading. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-86]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2009). A New Meso-scale Modelling of Static and Fatigue Damage in Woven Composite Materials with Finite Element Method. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-87]

Blommaert, C., Van Paepegem, W., Dhondt, P., De Backer, G., Degrieck, J., De Rouck, J., Vantorre, M., Van Slycken, J., De Baere, I., De Backer, H., Degroote, J., Vierendeels, J., De Pauw, P., Matthys, S. and Taerwe, L. (2009). Large scale slamming tests on composite buoys for wave energy applications. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-88]

Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2009). Meso-scale modelling in thermoplastic 5-harness satin weave composite. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-89]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2009). Optimization of a cruciform composite specimen under biaxial loading by means of an evolutionary algorithm. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-90]

De Baere I., Van Paepegem W and Degrieck J. (2009). Fusion Bonding of Carbon Fabric Reinforced Polyphenylene Sulphide by Hot-Tool Welding. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), 27-31 July 2009, Edinburgh, United Kingdom.

[2009-91]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J., De Wolf, K. and Vantomme, J. (2009). Numerical energy absorption study of composite tubes for axial impact loadings. Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-92]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2009). Strain rate dependency of Textile Reïnforced cements under static loading, Accepted for the Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-93]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Study of blast load on recyclable empty metal cans. Accepted for the Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-94]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Numerical axial impact study of pultruded circular and square composite tubes. Accepted for the Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-95]

Palanivelu, S., De Pauw, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Validation of digital image correlation technique for impact loading applications. Accepted for the Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-96]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009). Experimental and numerical study of pultruded composite tubes under blast loading. Accepted for the Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-97]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2009). Novel pure-shear sheet specimen geometry for dynamic material characterisation. Accepted for the Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009.

[2009-98]

Van Ackeren, J., Blom, J., Belkassem, B., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2009). Impact study of Textile Reinforced Cementitious materials: test method and experimental results, Accepted for the Proceedings of the 9th Conference on Brittle Matrix Composites (BMC-9), Warsaw, Poland, 25-28 Oktober 2009.

[2009-99]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Numerical energy absorption study of pultruded composite tubes. Simulia Benelux Users’ meeting, November 11-12, 2009, Landgraaf, The Netherlands. Best Presentation Award.

[2009-100]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Blast energy absorption of recyclable beverage cans. Simulia Benelux Users’ meeting, November 11-12, 2009, Landgraaf, The Netherlands.

[2010-101]

Gu, J., Sol, H. and Van Paepegem, W. (2010). Resonance fatigue testing of test beams made of composite material. Proceedings of the Eleventh Pan-American Congress of Applied Mechanics (PACAM XI), January 04 - 08, 2010, Foz do Iguaçu, Paraná – Brasil.

[2010-102]

Van Paepegem, W. (2010). Mechanics simulations with Abaqus @ UGent-MMS. Abaqus Academic Seminar, March 15, 2010, Leuven, Belgium.

[2010-103]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). Progressive fatigue damage modelling of textile composite on meso-scale with FE-method. Proceedings of the SAMPE EUROPE 31st International Technical Conference, Hotel Mercure Paris Porte de Versaille Expo, France, 12-14 April 2010.

[2010-104]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010). Damage characterisation of a textile reinforce cement composite material under low velocity impact loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-105]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Experimental and numerical study of the energy absorption of composite tubes for sacrificial cladding structures under blast loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-106]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Effect of tube geometry on the energy absorption and crushing patterns of composite tubes under quasi-static and impact loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-107]

Kakogiannis, D., Van Hemelrijck, D., Van Ackeren, J., Wastiels, J., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010). Progressive crushing of pultruded tubes under quasistatic and blast loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-108]

Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., Van Paepegem, W. and Vierendeels, J. (2010). Comparison of Slamming Wave Impact of a Rigid and Deformable Composite Cylinder with Numerical Simulation and Experimental Validation. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-109]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2010). On the nonlinear evolution of the Poisson’s ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-110]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Evaluation of local strain profiles in a satin weave composite: experimental vs. meso-FE modelling. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-111]

Voet, E., Daggumati, S., Luyckx, G., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Evaluation of local strain distribution in a satin weave composite using fibre Bragg gratings. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-112]

Jacques, S., Van Paepegem, W. and Degrieck, J. (2010). Comparative analysis of numerical strategies for simulation of delamination in advanced composites. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-113]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). Progressive fatigue Damage Modeling of Textile Composite on Meso-Scale with Finite Element Method, Materials Characterization and Experimental Verification. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-114]

Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2010). A Study on the Effect of the Clearance on the Contact Stress and Kinematics of Polymeric Composite Journal Bearings. Proceedings of the 14th Nordtrib Conference, Storforsen, Sweden, 8 - 11th June 2010.

[2010-115]

Nobre, J.P., Stiffel, J.H., Van Paepegem, W., Nau, A., Batista, A.C., Marques, M.J. and Scholtes, B. (2010). Quantifying the drilling effect during the application of incremental hole-drilling technique in laminate composites. Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010.

[2010-116]

De Strycker, M., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2010). Residual stresses due to the welding of cold-rolled steel tubes. Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010.

[2010-117]

Vepa, K.S., Van Paepegem, W., Degroote, J. and Vierendeels, J. (2010). Numerical Investigation of Deformable Composite Structures under Slamming Loads. Proceedings of the 2nd European Seminar on Coupled Problems (ECSO 2010), June 28 — July 2, 2010, Pilsen, Czech Republic.

[2010-118]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2010). Combined experimental and numerical approach for identification of dynamic material model parameters. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France.

[2010-119]

De Baere I, Van Paepegem W. and Degrieck J. Fusion bonding of carbon fabric reinforced polyphenylene sulphide. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France.

[2010-120]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010). Composite material characterization through biaxial testing of cruciform specimens. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France.

[2010-121]

Van Walleghem, J., , De Baere, I., De Thaeye, J., Ghosh, A., Van Paepegem, W. and Degrieck, J. (2010). Effect of flax fibre reinforcement on the riding comfort of composite racing bicycle frames. Proceedings of the 8th Conference of the International Sports Engineering Association (ISEA 2010), Vienna, Austria, 12-16 July, 2010.

[2010-122]

Stoykova, E., Van Paepegem, W., Minchev, G., Ivanov, B., Degrieck, J. and Sainov, V. (2010). Speckle noise reduction in full-field stress analysis by interferometric phase-stepping implementation of the photoelastic-coating method. Accepted for Proceedings of Speckle 2010, Florianopolis, Brazil, 13-15 September, 2010.

[2010-123]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010). Adaptive partitioning method in high resolution speckle imagery for sub-pixel digital image correlation. Accepted for Proceedings of the 2010 International Conference on Image Processing (ICIP 2010), September 26-29, 2010, The Hong Kong Convention and Exhibition Centre, Hong Kong.

[2010-124]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Effect of ply stacking on the variation in local strain and damage behaviour in a 5-harness satin weave composite. Submitted for the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010.

[2010-125]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). Progressive fatigue Damage Modeling of Textile Composite on Meso-Scale with Finite Element Method, Materials Characterization and Experimental Verification. Submitted for the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010.